The general firing range for Thompson enamels is 1400°–1500°F (760°–815°C). Enamels will fuse in 1 to 4 minutes depending on the color, type and thickness of the metal, and the temperature of the kiln. A typical firing is 1450°F (790°C) for around 2 minutes. Enamel powders will change in color after firing. Refer to the color image for a general indication of the fired result. Computer monitors do not accurately represent color, and enamel colors may vary slightly from batch to batch, so pre-testing your enamels before using them is recommended. Bronze is not recommended for enameling. The enamels are not formulated to adhere to it and will crack or chip off.

Color Specific Information:

• Color: 1319 Bitter Green
• Metals: Recommended for fine copper, silver and gold
• Recommended Firing Range: Consistent with general firing range
• Firing: Consistent with general firing times.
• COE: 288 cubic expansion Grade: 80 Mesh
• Type: Opaque
• Color Code: (C) Contains Cadmium

Additional Firing Notes:
Even though this is a Cadmium color, it fires very well on both copper and silver, within the normal firing range. No special considerations are needed.

---

©2013 - The color notes presented here are the intellectual property of Pam East and reproduction in whole or part in any form requires written permission.