SpeedFire ElectricMini FrontLoader Kiln Kit (SAVE $100) PMC Flex

Focused on Customer Service & Innovation

0 items: $0.00

Home > Firing & Drying >

SpeedFire ElectricMini FrontLoader Kiln Kit (SAVE $100) PMC Flex

Additional Photos:

Due to unexpected demand we have sold out of the 120v version of this versatile kiln, but expect new units to be available during the first week of January. Place your order today and we will fulfill it in the order received. If purchasing for a holiday gift, CLICK HERE to print a nice note of what they can expect or if you would prefer, might we suggest a Metal Clay Supply Gift Card?

Everything you need included in this awesome and affordable kit... FrontLoader Electric Kiln, Hattie Sanderson's 2 DVD set and the same tool set that Hattie uses on her DVD. We even include plenty of silver clay called PMC Flex that has a huge “open time” meaning you don’t have to work as quickly as you do with other types of PMC clays! Regular Price: $559. Promo Price: $459

SpeedFire ElectricMini FrontLoader Kiln

Hattie's 2 DVD - Contemporary Metal Clay 1

Hattie's Tool Kit with all basic tools on her DVDs

Black Max Antiquing Agent (1.5oz)

PMC Flex 15g - two packs

PMC3 15g Paste

PMC3 9g Syringe

HattieS NoStick Spray

15% Off Coupon Code for QuikArt Products - to be used on next order.

Our Price: $459.00

Sale Price: $436.05

You'll earn 918 Rewards Points

Product Code: 55822-PMC-FLEX-KIT

Qty:

More Information

The SpeedFire® ElectricMini™ FrontLoader™ is designed for easy access and features on board temperature control and digital temperature readout. The unique element placement allows for surround firing from the top, both sides AND the bottom. The kiln includes a removable shelf that sits above the bottom elements for traditional firing from the top and sides only.

For surround firing in the FrontLoader™ (which has elements in the kiln floor), the specially designed 310 stainless firing vessel (optional accessory) utilizes stainless steel mesh to hold the container about a 1/2” up off the floor above the elements. This provides heat from all four sides for better firing results when activated carbon is called for in the firing process. Alternate stainless containers such as 54976 offered below and other appropriately sized containers can also be used, but they should rest on top of a stainless steel mesh shelf such as 55825 shown below for maximum heat transfer. A short kiln post will also work but not as efficiently as the mesh shelf. It is okay for the kiln post to rest directly on the kiln floor.

Fires to 2000ºF
Digital temperature readout
Fully adjustable temperature control
Embedded “invisible” elements w/ Surround firing capability
Fiber Firing Shelf INCLUDED!
Fires ALL metal clays, enamels and small glass projects
Fires pottery clay for bisque and glazing
Green energy use - about 5¢ an hour
Weighs just 9 pounds - easy to transport
75 cubic inch firing chamber
90 day manufacturer’s warranty*
Made in the USA

Kiln: 7-1/2”W x 8”D x 13"H
Chamber: 4-5/8”W x 3-1/2”D x 4-5/8”H

CLICK HERE FOR INSTRUCTIONS & GRAPHS
Specifications

Chamber: 4-5/8”W x 3-1/2”D x 4-5/8”H
Cubic Inches: 75

Kiln: 7-1/2”W x 8”D x 13"H
Voltage: 120vac
Wattage: 420 watts

Unit Weight: 9 lbs
Ship Weight: 12 lbs

*Manufacturer's warranty covers defects in materials and workmanship for 90 days. Please note that small fiber muffle kilns of any brand are not designed to withstand frequent and prolonged firings at maximum temperature and doing so may result in a shorter useful life of the muffle. Please note items below under Mechanical Aspects of the FrontLoader™ that are to be considered normal for the operation of the FrontLoader over time.

Getting to know your FrontLoader™

The first thing you can do is to environmentally profile your FrontLoader™. It is not complicated and once done it does not need to be repeated. When we profiled the FrontLoader™ it is likely that our environment was different than yours will be. The numeric values we provide are based on OUR environment. Your line voltage, air conditioning vent placement, ceiling fan in operation, room temperature, proximity to a sunny window, outdoor operation - these are aspects that are in your control. The following process is to make sure you know what your FrontLoader™ is capable of by knowing what temperatures it will attain at different settings.

The process is quite simple. With a piece of paper at hand, write down five minute increments down the left side... 5, 10, 15, etc to about 75 minutes. Note the ambient temperature on the digital readout when you first turn the FrontLoader™ on. Turn the kiln to FULL at the 12 o’clock position of the kiln and start timing. Every 5 minutes note the temperature until the temperature stabilizes. Let the kiln cool completely - a table fan can help. Repeat the process setting the dial on the next lower setting on the knob to the 12 o’clock position. Do this until the top temperature is the lowest you have need for and you are done. Now you know what your FrontLoader™ can do at different settings based on your own environment.

Mechanical Aspects of the FrontLoader™

The FrontLoader™ is manufactured with rigidified fiber that uses an organic binder in the process. There will be a small residual amount left. When you first fire the FrontLoader™ you may notice a small amount of smell from this but it should be completely gone after the first or second firing. It is non-toxic.

After many firings you may notice a bit of heat discoloration of the muffle face and the green finish just under the door. This is normal. You may also notice that after numerous firings the door and kiln body display a bit of heat distortion. This in no way affects the performance of the FrontLoader™. If the latch becomes a bit stiff to engage, the back catch can be adjusted to compensate by loosening the screw and moving the catch just a bit. Since the fiber muffle is a cast product, the process of firing to high temperatures may form very thin tiny fissures in the kiln wall. This is to be expected and in no way compromises the function or life of the FrontLoader™.

Temperature Chart

The temperature chart below is a generalization of what you can expect and may be different than what you will experience. Following the instructions under Getting to know your FrontLoader™ will index your kiln to your environment and voltages and should only need to be done one time.

The knob positions on the FrontLoader™ are indicated on the chart by different color lines. Time is on the horizontal axis and temperature is on the vertical axis.

Actual times & temperatures will vary from those presented here due to variables beyond our control such as voltage, ambient room temperature and air flow.

Share your knowledge of this product with other customers... Be the first to write a review

Products

Information

Policies

My Account

Help

Metal Clay Supply | 225 Cash Street, Jacksonville, TX 75766 | 903-586-2531