Paragon Home Artist Digital Kiln

Focused on Customer Service & Innovation

0 items: $0.00

Home > Firing & Drying >

Paragon Home Artist Digital Kiln

The portable Paragon Home Artist Digital Kiln sets up in minutes. It plugs into a standard household outlet and features a collapsible luggage carrier for easy moving. Take it with you on vacation or to seminars.

The kiln fires rapidly up to 2000°F. It uses space-age ceramic fiber insulation, noted for energy efficiency. It is large enough to fire 10” china plates.

Make great use of your Home Artist and order the optional Furniture Kit offered as an accessory below.

The Furniture Kit allows you to stack multiple layers of silver clay, jewelry, glass etc...

Without the kit you could only fire what would fit on the bottom of the kiln.

Our Price: $944.00

You'll earn 1888 Rewards Points

Availability: Temporarily the shipping time is 3 to 4 weeks

Product Code: 54648

Qty:

More Information

The Home Artist is ideal for traveling teachers, because it cools rapidly.

The stainless steel jacket is vented to lower the surface temperature. A latch holds the lid securely closed. A safety toggle switch on the side of the electrical box shuts off power to the heating element. A built-in fuse protects the controller. The firing chamber is made of space-age ceramic fiber. This insulation is noted for energy efficiency.

Additional Information

Features of the Home Artist

Sentry Xpress 3 key controller
Energy-efficient ceramic fiber firing chamber heats rapidly.
Stainless steel jacket is vented for lower surface temperature
Safety on/off switch
Fall-Away lid vent
Light enough to take anywhere.
Telescoping luggage carrier with wheels for easy moving; collapses for convenient storage.

The Sentry Xpress 3-key controller is packed with features. On ceramic kilns, the controller includes Cone-Fire and 8 segment Ramp-Hold modes. (Note: Ramp-Hold and Cone-Fire on the Sentry Xpress do not include some of the advanced features of the Sentry 2.0.)

Features of the Sentry Xpress 3-key Controller for Ceramic Kilns

Fire to a pyrometric cone by merely entering cone number and slow, medium or fast speed.

Program Review lets you check the program you are about to fire.

Set a temperature alarm to remind yourself to close a vented lid.

Design Ramp-Hold programs with up to 8 segments (steps).

Skip a segment in Ramp-Hold during firing.

Hold (soak) the temperature in both Cone-Fire and Ramp-Hold.

Control both heating and cooling in Ramp-Hold.

Add hold time in Ramp-Hold during firing.

Change the target temperature in Ramp-Hold during firing.

Temperature Display throughout firing and cooling in your choice of °F or °C

Thermocouple Offset adjusts the thermocouple readout.

Set the Delay to turn on the kiln later to suit your schedule.

Error Messages report mechanical problems such as a disconnected thermocouple, stuck relay or broken element.

12 Month Warranty

LED Lights show whether you are in program, review, or firing mode

Specifications

Max. Temperature	2000F 1093C
Amps	15
Phase	1
Watts	1800
Nema	5-15P
Breaker Size	20
Circuit Wire Size	12 gauge
TUV tested to CSA and UL Standard 499	N
CE	N
IMPORTANT: Some areas such as Canada and Europe require a lid or door safety switch on kilns.
Control Type	Sentry Digital 3-key Ceramics
Voltage	120
Hertz	60

Kiln Type	Top Loading Round
Sides
Understanding Chamber Measurements
Chamber Volume	0.78 CU.FT. 22.09 litres
Chamber Width	12.00 IN 305 mm
Chamber Depth	12.00 IN 305 mm
The Outer Size of the Kiln and the Shipping Size: Width = Left to Right; Depth = Front to Back; Height = Top to Bottom
Outer Size	16.00W x 23.00D x 18.70H Inches 406W x 584D x 475H mm

Furniture Kit for Home Artist Kiln

Our Price: $63.00

Add

Average Customer Review:

5 of 5

| Total Reviews: 1 Write a review.

3 of 3 people found the following review helpful:

Absolutely love it	May 13, 2011
Reviewer: Elizabeth from Constantia, NY United States

I've only fired it up twice and am very pleased with the results. I love the medium large size and it runs on regular household current! My other kiln is manual so this was the first time I've used a programmable kiln. The instructions to set the ramp and hold are very easy to understand; I set it on the first try. I would recommend this to any serious hobbiest.

Was this review helpful to you?

	Blue Sapphire Corundum $3.45

Products

Information

Policies

My Account

Help

Metal Clay Supply | 225 Cash Street, Jacksonville, TX 75766 | 903-586-2531